Section 4124. Aggregate for Slurry Mixtures.
4124.01 DESCRIPTION.
Crushed stone
4124.02 GRADATION.
Meet the requirements for Gradation No. 22 or No. 23 (as specified in the contract documents)
of the Aggregate Gradation Table, Article 4109.02.
4124.03 QUALITY.
Type 4 or better friction classification aggregate as shown in
Materials I.M. T203. Meet the following requirements based on aggregate crushed to 3/4 inch
nominal size.
TABLE 4124.03
Aggregate Quality Maximum Percent Allowed Test Method Abrasion 40 AASHTO T 96 A Freeze 10 Iowa DOT Materials Laboratory Test Method 211, Method A Alumina (a) 0.7 Iowa DOT Materials Laboratory Test Method 222 Sand Equivalence 45 (Minimum) AASHTO T 176 Organic Materials 0.01 Iowa DOT Materials Laboratory Test Method 215 (a) If the Alumina value fails, the A Freeze value shall be determined for specification compliance. Iowa DOT Materials Laboratory Test Method 222 does not apply to gravel.