Section 4118. Bedding Material for Non-Primary Road Projects
Aggregate of the following types:
· Crushed Stone,
· Gravels for which 75% or more of the particles retained on the 3/8 inch sieve have at least one fractured face as defined in Materials I.M. 305 (the fractured face requirement shall only apply to bedding material placed under Primary or Interstate roadways), or
· Crushed PCC, if approved by the Engineer.
Meet the requirements for Gradation No. 3 of the Aggregate Gradation Table, Article 4109.02. Restrictions on the No. 200 sieve do not apply.
The requirements of Table 4118.03-1 apply to individual virgin aggregates:
|
Table 4118.03-1: Coarse Aggregate Quality (Virgin Material) |
||
|
Coarse Aggregate Quality |
Maximum Percent Allowed |
Test Method |
|
Abrasion |
50 |
AASHTO T 96 |
|
C – Freeze (a) |
20 |
Iowa DOT Materials Laboratory Test Method No. 211, Method C |
For crushed PCC, meet requirements of Materials I.M. 210.