Content Information
On this page...
This section contains information related to modifications and revisions of road design details. Road design details are developed to aid the designer in the development of detailed design plans. They can be accessed through the DOT’s website https://iowadot.gov/design/Road-design-details.
Road design details consist of:
Design and Tabulation Forms,
Standard Notations,
Design Detail Sheets, and
Typical Components, Grading Typicals, and Detour Typicals.
2000s through 9000s
Design and Tabulation Forms
These are numbered between 100 and 199. Many of these forms are used for listing and tabulating quantities of materials required for a project. Others are tables used for listing design or quantity information relevant to a project such as circular curve data or tabulation of utilities. These forms are typically placed on the C, CD, CE, J, or M sheets of a plan.
Back to topStandard Notations
These are numbered between 200 and 299. They provide information pertaining to the construction of the project itself and are placed on the C sheets of a plan.
Back to topDesign Detail Sheets
These are numbered between 500 and 599. They provide construction details for a specific design situation. Detail sheets are similar to standard road plans, but feature design situations that are less frequently encountered and are more specialized. They are usually placed on the U sheets of a plan.
Back to topTypical Components, Grading Typicals, and Detour Typicals
These are cross sections of the components used to build models. These are placed in the B sheets of a plan.
Back to top2000s through 9000s
These consist of the 2000s, 4000s, 6000s, 7000s, 8000s, and 9000s. They are similar to design detail sheets, but are more focused on a particular design feature. These are placed in the B sheets of a plan.
Back to topModifications of Road Design Details
Occasionally it is necessary to modify a road design detail. The process is slightly different for each type.
Back to topDesign and Tabulation Forms
When a design or tabulation form is modified, remove the date and replace it with the word MODIFIED. The upper right should appear similar to Figure 1.
Back to topStandard Notations
When a standard notation is modified, remove the date and replace it with the word MODIFIED. The upper right should appear similar to Figure 2.
Back to topDesign Detail Sheets
When a design detail sheet is modified, the Iowa DOT logo is replaced with MODIFIED. State the reason for the modification. The revision number and date are left the same. The upper right should appear similar to Figure 3.
Back to topTypical Components, Grading Typicals, and Detour Typicals
When a typical component, grading typical, or detour typical is modified, remove the date and replace it with MODIFIED. The tab in a typical component should appear similar to Figure 4.
The upper right of a grading typical or detour typical should appear similar to Figure 5.
Back to top2000s to 9000s
When a typical is modified, remove the date and replace it with the word MODIFIED. The box should appear similar to Figure 6.
Back to topRoad Design Detail Revisions
Occasionally it is necessary to revise road design details to incorporate changes in technology, procedures, or specifications. Notify the Methods Engineer if revisions are needed to a Road Design Detail. The Methods Section will make the changes.
Back to top